 Switch to
Platinum Performance Gear Lubricant and lower your gear operating temperatures.
It can save your equipment
Years of field use has shown that synthetic Gear Lubricants can
lower gearbox temperatures dramatically. Platinum Performance Gear Lubricants are
made from PAOs, for the ultimate in heat and wear resistance.
Platinum Performance Gear Lubricants last much longer in service -
up to 10 times as long as "over the counter" gear oils. This lowers
your lubricant costs. It lowers your oil disposal costs. It lowers your
maintenance costs. And you can lower your equipment failure rate with Platinum
Performance Gear Lubricant.
Our products are over-built. They have an extra concentrations
of friction-fighting molybdenum (moly) compounds that bond with and protect metal
surfaces. Platinum Performance Gear Lubricants are highly resistant to shear and
wear. They outperform ordinary oils at extreme temperatures. Platinum
Performance Gear Lubricants stick, they cling, and they adhere to metal surfaces.
They don't sling or wash off.
The additives used in Platinum Performance Synthetic
Gear Lubricant not only reduce friction, but coat your gears with antiwear, antirust and
mild EP protection.
Try DSI Platinum Performance Synthetic Gear Lubricant
Today. Don't wait to start protecting your equipment with a higher level of
security.
Applications:
Platinum Performance Synthetic Gear Lubricants are
recommended for use in all types of industrial and automotive applications: enclosed
gearing as well as plain and rolling element bearings. These lubricants are ideal for
heavily loaded low speed gears and bearings. Platinum Performance Synthetic Gear
Lubricants are often chosen in high temperature gearbox applications.
Available in ISO 32, 68, 150, 220, 320,460, 680 and
1000 grades, as well as 75W-90 and 80W-140 multivis grades.
Benefits:
Protects your equipment by adding
friction fighters, anti-oxidants and metal passivators to the oil. Increases the
Viscosity Index of an oil to help cushion and lubricate metal surfaces better.
Available in: 5 gallon (19 l.) pails and 55
gallon (205 l.) drums
TYPICAL CHARACTERISTICS |
DSI
Platinum Performance Full Synthetic Gear Oil
85-140 |
Specific Gravity |
0.86 |
Flash Point, F. |
440 |
Timken OK Load |
75 |
Viscosity, cSt @ 100 C., |
19.0 |
4-ball Wear, scar, mm |
0.30 |
| Copper Corrosion` |
1B |
Pour Point (°F) (ASTM D 97) |
-40 |
Ash content, %: |
0.40 |
|
